1 Working principle of the
This series of ignition device is mainly composed of high energy ignition HZDH, high-power semiconductor firing gun HZDZ, high-pressure shielded cable HZDL of three parts.
Ac 220 v or 110 v power frequency, by boosting rectifier transform into dc pulse voltage, the storage capacitor charging. When the voltage on the capacitor to discharge tube breakdown voltage, discharge current discharge tube, choke, shielded cable until formed in the semiconductor igniter clearance high-energy electric spark. When the ignition to stop working, the rest of the charge on the capacitor discharge resistance grounding through.
2 features: low discharge voltage, spark energy, corrosion resistance, can be lighter in water, easy to operate
3 scope of application
This device in electric power, metallurgy, petrochemical, aerospace, industrial boilers, and other fields have a wide range of applications. Can be applied directly to ignite gas, liquefied petroleum gas, kerosene, diesel oil, heavy oil, residual oil, etc
4 high-energy ignition HZDH
型 號 | 名 稱 | 技術參數 | 用 途 | 備 注 | |||
儲能J | 輸入電壓V | 輸出電流A | 火花頻率 | ||||
HZDH-20 | 高能半導體 | 20 | AC220±10% | 5 | 15 | 輕油/重油/渣油 | 高能半導體 點火器 |
HZDH-12 | 高能半導體 | 12 | AC220±10% | 3 | 15 | 輕油 | |
HZDH-6 | 高能半導體 | 6 | AC220±10% | 2 | 9±3 | 可燃氣體 | |
HZDH-2 | 高能半導體 | 2 | AC220±10% | 1 | 15 | ||
HZDH-1G | 高壓間隙 | 0.3 | AC220±10% | 5 | 50 | 工業燃氣爐 | 高壓間隙點火器 |
HZDH-2Z | 高能直流 | 2 | 充電電壓 AC220±10% | 5 | 1-3 | 工業燃氣爐 | 直流點火器 |
HZDH-3K | 高能可控硅 | 0.5 | AC220±10% | 5 | 25 | 工業燃氣爐 | 可控硅點火器 |
5 musket HZDZ high-power semiconductor pointNote: explosion-proof type for type B, add after such as HZDH - 20 B, HZDH - 6 B
型號 | 發火電壓 | 用 途 | |
HZDZ-1-□□ | <1200 | XDZ-1-□□
點火槍長度L 槍桿結構特點：可擺動桿注R、剛性直桿不注 點火槍槍頭結構特點：1-槍頭與槍桿一體 2-槍頭與槍桿兩體 3-固定安裝催化嘴 徐州華至高能點火槍 | 點油、點氣 |
HZDZ-2-□□ | <1200 | 點油、點氣 | |
HZDZ-3-□□ | <1200 | 點氣 |
6 high pressure shielded cable HZDLNote: explosion-proof type for type B, add after HZDZ - 1-1500 - B
型號 | 中心電纜阻值 | 耐壓V | 最小彎曲半徑 | HZDL- 徐州華至高壓屏蔽電纜 □ - 電纜長度。通常為6m，也可以根據用戶要 求在1-50m選擇長度值。 |
HZDL-□ | ≤0.02Ω | >5000V 50Hz | ≥100mm |
Note: explosion-proof type for type B, add after such as HZDL - 6000 - B
